UTS

英

美

abbr.  抗张强度极限；拉力强度（极限）(Ultimate Tensile Strength); 水下电话系统(Underwater Telephone System); 统一传输系统(Unified Transfer System)

计算机

双语例句

• In addition, the mechanical properties ( including the UTS value and microhardness) of the welded joints decreased compared to the welded joint without flux.
  涂覆活性剂后，焊接接头的力学性能（包括极限抗拉强度和硬度）降低。
• Influence of fibre length on UTS and reliability of mullite/ zl109 Composites
  纤维长度对M/ZL109复合材料强度及可靠性的影响
• Compared with peak aging alloys, the ultimate tensile strength ( UTS) of two-step aging alloys reduced by about 13%, but UTS of regression-reaging treated alloys excelled that of peak aging alloys.
  同时发现，双级时效合金的抗拉强度比峰时效合金的强度下降了13%左右，而回归再时效合金的强度优于峰时效合金的强度。
• The output parameters of the model are three mechanical properties namely ultimate tensile strength ( UTS), yield strength ( YS) and elongation ( ELO).
  模型的输出为三个力学性能指标，即抗拉强度、屈服强度和延伸率。
• CW_PA, ceramometal alloy, joined by laser welding machine, was tested by the UTS, SEM and metallographic_examination. The good results show that it can be applied to the clinic.
  激光焊接CWPA烤瓷合金，测试其力学性能，作金相，SEM分析，结果表明完全达到临床要求。
• The structure homogenization as well as UTS and elongation is related to tempering temperature time, interlayer agent etc.
  其组织的均匀程度与抗拉强度、延伸率一样与回火温度、时间及中间层合金的成份有关。
• , and YS ( yield strength) and the value of YS/ UTS increase through the followed artificial ageing with obvious loss of elongation.
  而其后的人工时效处理能明显提高合金的屈服强度和屈强比，但也明显降低了延伸率。
• Conclusion Defining the concept of ulnar tunnel and the knowledge of the complexity and rarity of UTS can effectively guide diagnosis and treatment.
  结论明确腕尺管的概念、腕尺管综合征的少见及复杂性，可以有效指导临床诊断和治疗。
• The Unmanned Turret System ( UTS) is the developing direction for future fire system. The UTS is relatively secure to the crew members when the tank and armored vehicle turret is hit with a high probability.
  无人炮塔系统是未来火力系统发展的方向，在坦克和装甲车辆炮塔部分被命中概率高的现实情况下，无人炮塔对乘员来说相对安全。
• At the same time, the Ultimate Tensile Strength ( UTS) has increased remarkably, the transcrystalline fracture of tungsten particles is the major fracture form in the SEM fracture photos.
  合金强度也显著增加，断口照片上显示钨晶粒的穿晶断裂为主要的断裂方式。